Special glue for changing the handles
Instructions for removing handle or replace
Heat a kettle of water.
Protect the existing handle of the stick with NW cling film or a thick plastic bag!
The floor with the handle into the boiling water. There he remains 3-4 minutes. (The
Adhesive dissolves in boiling water and soft)
Pull off the handle after about 4 minutes by hand. He would have easily solved the floor!

The new glue with a hair dryer, heat the highest level. Please wear gloves because the tea light can be very hot!

When the glue is soft, the end of the stick where the handle was a little glue on the floor
Put new paint grip (please make sure that the loop starting at the right shows the direction).

Control the height: please remove pads and put both sticks next to each other if both sticks are identical.

That was it.
Ask the Glue / handle can only be cold.